DAYBETTER Led Strip Lights 32.8ft 5050 RGB 300 LEDs Color Changing Lights Strip for Bedroom, Desk, Home Decoration, with Remote and 12V Power Supply

Product Description

APP Control
✓
X
X
✓
✓
✓
Length
50FT
65.5FT
50FT
6 Pack
100FT
50FT

Daybetter led strip lights, light up your life

The Package contains: 2 rolls 16.4ft rgb led strip lights, 12 volt power supply, ir box controller, 44 key remote

LED strip lights kit

32.8Ft Led Strip Lights

SMD: 5050 300 leds
Color: RGB
Voltage: 12 volt
Length: 2 rolls 16.4feet
Wide:10mm

44 Keys IR Controller Remote

Rgb controller box
44 keys ir remote
Control distance: 5meter (must be poniting at the sensor without any obstacles)

5A Adapter

Input: 100-240 Volt AC 50/60Hz
Output: DC 12 Volt
Max Current: 5 Aampere
Max Wattage: 60 Watts

Installation Guide

Warming tips:

Please clean the surface before stick on the strip and make sure that the paste is successful by one time, otherwise, the stickiness will become weak after repeated use, and you need to add back glue again
Please don’t stick the lights to the metal surface that conductive, it may cause a short-circuit on the strip lights
Don’t let them on the spool when you testing them for more than 2 minutes, they need to dissipating heat
The ventilation must be ensured, these lights need an excessive amount of airflow for cooling

Connection tips

Please notice to connect the 4pin connectors of the controller box arrow to the positive of lights; If not, it will don’t work.

Test the lights before installation

Please confirm your connection is correct, below is some steps need to notice:

Connect the 4pin connectors of the controller box arrow to the positive of lights.
Make sure the lights are connected, and the power light up green bulb.
Pull out the transparent chip from the button of the IR remote.
Use the IR remote turn on the lights (IR remote aim at the IR receiver).

DIY function

About DIY function, Please follow the steps below：

Step 1: Turn on the lights. Press one of the RGB buttons. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: If you need deeper red color, press and hold the red up button(at least 5 seconds), the longer you hold, the deeper red color you have. You can also press green and blue down, the changing will be more clearly. Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs.

Strong adhesive

Adhesive is strong and lets you place, such as the back of TV, table, cabinet and window

TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood

Applications

Used for kitchen, they are stick well on cabinet and wall

Used for living room decoration for backlight, under desk, behind TV

The lights be used for bedroom, ceiling

Colorful and durable: The infrared remote can adjust multiple colors, including rgb, white, 16 other colors and their brightness; With 6 dynamic modes (auto, flash, jump3, jump7, fade3, fade7) and 2 speed modes (quick, slow) by remote, you can make the light strip show varieties of different color changes; Use the DIY buttons to save 6 colors if you like
Cuttable and linkable: Our 32.8 feet led lights strip have 300 leds, it can be cut every 3 LEDs along the cutting marks if you don’t need such a long lights or you could extral connectors to extend the lights for your bedroom, TV, desk, computer indoor
Remote contol: You can use the infrared remote control to remotely control the light strip to suit the mood of the room easily; You can set it according to different scenes until you are satisfied
Widely use: The led lights are suitable for bedroom, kitchen, cabinet, car, living room, party or wedding


Price: $22.99 - $19.99
(as of Jul 27,2025 23:46:09 UTC – Details)